Thứ Hai, 17 tháng 12, 2018

Power SOCL504 2.1 Channel Amplifier

Power Amplifier SOCL 504 for stereo + subwoofer speakers
This is my project about Power Amplifier SOCL504, which I applied for the use of 2.1 (stereo + subwoofer) speaker system. Why am I using this SOCL504 driver for the use of 2.1 speaker channels? Yes, because the power amplifier driver is very suitable for use in various places, both in the homeroom and outdoors. And for the sound produced is also very satisfactory. Adopted from a variety of modifications SOCL504 power amplifier, this circuit highly recommends for you who like to make audio power amplifier.

And below for the SOCL504 power amplifier circuit that I combine to get a power amplifier with a 2.1 channel speaker system.

Power SOCL504 2.1 Channel Amplifier Circuit Schematic
Circuit Description
There are 3 sets of power amplifier SOCL 504, in the blue and green line is using for stereo (satellite speaker's) and the red line is using for subwoofer speaker. The 3 power amplifier SOCL504 I have prepared for its preamplifier you can see here: 2.1 Channel Preamplifier.
The difference between the stereo and the subwoofer amplifier is found in the capacitor of the A1837 and C4793 driver transistors. For stereo power amplifier I use 220pF and my subwoofer uses 100pF. What is the purpose?
The goal is to place high-frequency output. The higher pico size of the capacitor, the high tone gets bigger so the treble sound will get out but its make more noise also. And the right value is 220pF and the subwoofer amplifier uses 100pF.
In addition to capacitors, the final transistor is also different. Only in number, for stereo amplifiers use 1 set 2SC5200 2SA11943 and subwoofer amp using 2 final sets of transistors. It aims to distinguish the output power and power amplifier power to control the small or large power speakers. And obviously for subwoofer speakers will need more power so that I put 2 pieces of the final transistor for the subwoofer amplifier.
The power supply uses a bridge diode that I give the capacitor to filter and coupling AC to DC circuit. and my capacitors bank and filters use 24 x 680uF - 1000uF / 100V and 4 x 100N / 275V. The input AC voltage is very wide, starting from 20V AC - 75V AC CT.

Specifications
Speaker impedance: 4-8ohm
Supply voltage: AC 20-75V CT MIN 10A 
Final Transistor: Toshiba 2SC5200 NPN, 2SA1943 PNP
Channel: 3 channel (left, right, subwoofer) using this 2.1 Preamplifier Circuit
Total Output power: 200W * 2 + 600W * 1 subwoofer (Upgradable)
Output matching: 4-8 ohm
Frequency response range: 14-100khz

2 Layers PCB Layout SOCL504 Power Amplifier
PCB Layout Power SOCL504 2.1 Channel Amplifier
PCB Size 300mm x 135mm
For its PCB I provide 2 files that are in PDF format and Gerber RS274-X. Please download later at the end of the post. For pdf format, you can make it in double layer PCB with black and white picture top and bottom, make your own PCB tutorial you can see on my youtube channel video list. And for Gerber files, you can upload and order to PCB Prototype sites I highly recommend that PCBWay.com. Why PCBWay is recommended?
Because PCBWay is the most professional PCB manufacturer for prototype and low volume production. With more than a decade in the field, PCBWay committed to meet the needs of customers from various industries in terms of quality, delivery, cost-effectiveness and other requests. As one of the PCB manufacturers and the most experienced SMT Assembler in China, PCBWay is strongly recommended to be your friend in terms of PCB production and component assembly. For ways to upload and order you can see in the video below along with designing the PCB. 

Complete Video Power Amplifier SOCL504 for 2.1 Channel Speakers.

Download
PDF : Stereo + Subwoofer Power Amplifier SOCL504
Password: elcircuit.com

Yamaha Power Amplifier PA-2400 Schematic & PCB

In this post I will only share the schematic circuit of Yamaha PA-2400 power amplifier, the Power Amplifier is very tough that has power up to 2000W even more. Yamaha Power Amplifier is very suitable for concerts, Dj amplifiers, or can also be used at home. With a wide power supply voltage ranging from 45V - 100V, it allows you to operate this Yamaha power amplifier.

Immediately, see the power amplifier circuit scheme:
Yamaha Power Amplifier Circuit Diagram PA-2400
If you want to make this Yamaha power amplifier please use PCB in the picture. If the picture is less clear please download link below:
Power Amplifier Yamaha PCB Layout Design
PCB Layout.PDF
This time i will update with my Yamaha Power Amplifier Driver + Final Transistor Toshiba 2SC5200 and 2SA1943. For PCB Driver more loud Bass you can download here:

See also my Video about making this PCB Driver Power Amplifier and testing Yamaha Power Amplifier PA-2400 more Bass sound output below: PCB Power Amplifier Driver.PDF

DIY PCB Power Amplifier Driver Video

Tested Yamaha PA-2400 Amplifier Video

1200W Power Amplifier Crown XLS 1200

Power Amplifier Crown 1200W CROWN XLS
This time I will share about power amplifier circuit Crown XLS x6FT, where this power amplifier can be produced 1200W RMS. This power amplifier Crown XLS x6FT can be supplied with a voltage of at least 45V DC to 90V DC, and to get maximum power you can use a Power supply with high voltage and current. For example, using 75V 20A. Final Transistor power amplifier using 6x 2SC5200 / 2SA1943. Below you can see the schematic power amplifier.
Crown XLS schematic power amplifier
crown power amplifier circuit diagram

PCB Layout Crown XLS power amplifier 2 Layer
PCB Power Amplifier crown XLS
Power amplifier crown PCB Layout
Finished PCB Power Amplifier Crown 1200W

Troubleshooting in component installation, consider the image below:
Power Amplifier crown troubleshooting

Explanation of number labels:

1. You can use a non-polar 10uF / 25V capacitor or polarized capacitor in series 22uF + 22uF and attach the foot + to the PCB

2. Same as number one, but if you use a series polarized capacitor that is 2u2F + 2u2F and attach the foot + to the PCB,

3. Resistor 1/4W 470R 5% Tolerance

4. Use the MUR120 diode or you can not use the diode.

5. Resistors installed at the bottom, ie 2x470R / 2W instead of 2x0.5R 5W.

PCB High Power Amplifier Crown 1200W

Crown Power Amplifier circuit


Download
Schematic + PCB Layout design Power Amplifier Crown XLS.RAR

100 Watts Mono Audio Amplifier Board DIY 2SC5200

200 Watts Mono Audio Amplifier DIY

This is 200 watts mono audio amplifier board. this project can play upto 200 watts speaker easily.
i used two 2SC5200 & two 2SA1943 Transistors and 45-0-45 transformer for this project

Materials for the Project
4Pcs. 2.2 Ohm 1/2W Resistance
2Pcs. 100 Ohm 1W Resistance
1Pcs. 10 Ohm 2W Resistance
2Pcs. 4.7K 1/2W Resistance
1Pcs. 33 Ohm Resistance
3Pcs. 4007 Diode
3Pcs. 150 Ohm Resistance
1Pcs. 68K Resistance
1Pcs. 10K Resistance
1Pcs. 1K Resistance
2Pcs. 33K Resistance
2Pcs. 3.3K Resistance
1Pcs. 24v Zener Diode
2Pcs. 100pf Capacitor
2Pcs. 470pf Capacitor
1Pcs. C1815 Transistor
2Pcs. C2229 Transistor
2Pcs. 2N5401 Transistor
1Pcs. 470Kpf Capacitor
1Pcs. 100Kpf Capacitor
2Pcs. 47uf100v Capacitor
1Pcs. TIP42C Transistor
4Pcs. 0.33 Ohm 5W Resistance
1Pcs. A1941 Transistor
1Pcs. C5198 Transistor
2Pcs. 2SA1943 Transistor
2Pcs. 2SC5200 Transistor
1Pcs. D10XB60 Bridge Rectifier
2Pcs. 4700uf80v Capacitor
1Pcs. 10 Ohm 5W Resistance with 5uH inductor coil

Tda7294 stereo new 200 watt amplifier

400 Watts Stereo Audio Amplifier Board DIY 2SC5200+2SA1943



This is 400 watts stereo audio amplifier board. this project can play upto 2 X 200 watts speaker easily.
i used two 2SC5200 & two 2SA1943 Transistors and 45-0-45 transformer for this project

Materials for the Project
2 pcs. 33 Ohm  Resistance
2 pcs. 68K  Resistance 
3 pcs. 10K Resistance
2 pcs. 1K  Resistance
4 pcs. 33K  Resistance
6 pcs. 150 Ohm  Resistance
4 pcs. 3.3K Resistance
8 pcs. 2.2 Ohm 1/2 Watts Resistance
4 pcs. 4.7K 1 Watts Resistance
4 pcs. 100 Ohm 1 Watts Resistance
2 pcs. 10 Ohm 2 Watts Resistance
8 pcs. 0.33 Ohm 5 Watts Resistance
2 pcs. 10 Ohm 5 Watts Resistance
1 pcs. 47K Potentiometer
1 pcs. 10XB60 Bridge Rectifier
6 pcs. 4007 Diode
2 pcs. 24 Volt zener diode
4 pcs. 470pf Capacitor
4 pcs. 100pf Capacitor
4 pcs. 47uf100v Capacitor
2 pcs. 6800uf80v Capacitor
2 pcs. 100Kpf Capacitor
2 pcs. 470Kpf Capacitor
4 pcs. C2229 Transistor
4 pcs. 2N5401 Transistor
4 pcs. 2SC5200 Transistor
4 pcs. 2SA1943 Transistor
2 pcs. C1815 Transistor
2 pcs. C5198 Transistor
2 pcs. A1941 Transistor
2 pcs. TIP42C Transistor
2 pcs. 6uH coil

Bài đăng mới nhất

ALEPH-M CLASS A ANFİ DEVRESİ N KANAL MOSFET

Aleph-M çıkış gücü yaplaşık olarak 35w Class A sınıfı anfi için oldukca iyi bir değer çıkış modfetleri n kanal 2 adet irfp240 kullanılmış be...

Bài đăng phổ biến